Home / DIY / $6 To More Interesting Dryfire

$6 To More Interesting Dryfire

Getting started with dryfire is super easy. Tape some scaled dryfire targets to the wall, clear your pistol, maybe put a par timer app on your phone, and go to town.

I’ve been practicing with a handful of dryfire targets taped to my garage door for a few years now, but as I’ve gotten to the point of wanting to work on more specific things (like keeping the gun up while moving into a position where I’m going to engage a target I can’t see) I’ve found it increasingly difficult to setup those sorts of things.

wpid-wp-1436140604322.jpeg

The solution to this is to build some sort of target stand for my scaled dryfire targets so I can place them exactly where I want them. I’ve been wanting something like this for a while, but it wasn’t until today that a friend told me about the PVC target stands he made for his targets that it finally made sense to me.

wpid-wp-1436140538911.jpegAfter hearing about his target stands, I remembered I had 8′ of 1/2″ PVC in the garage. I ran to Home Depot and spent about $3.50 on tee fittings, and pipe caps. While I was there I checked the price on a 10′ piece of 1/2″ PVC pipe, and it’s about $2.50, so for $6.00 total you can build one of these.

Note: I know the pipe caps may seem unnecessary, but they’re worth it. Without them the stand will be wobbly because of the tee fittings.

For the stand part, I cut a piece of PVC 5′ long. The base is made of (6) 6″ long pieces all pushed together into the tee fittings.

Parts List

  • (1) 10′ piece of 1/2″ PVC pipe

  • (3) non threaded 1/2″ Tee fittings

  • (4) non threaded 1/2″ pipe caps

  • scaled dryfire target from BenStoegerProShop.com

  • some tape to tape the target to the stand

Easy, cheap, breaks down so you can toss it in a closet, and it works great. What more do you want?

 

About Lucas

Editor/Head Honcho at Triangle Tactical. Lucas is a life long shooter and outdoorsman, avid concealed carrier and competitive shooter, and a lover of pork fat.

8 comments

  1. Me likee, nice job!

  2. Need some advice. I got the Ben Stoeger scaled targets. Do they fit into the Steve Anderson drills? For example, do I use the 1/3-scale cardboard targets at 10 feet, when dry-firing the 30-feet drills? Even though it’s 1/3 scale, it just seems like a whole lot closer than a full-size IDPA target at 30 feet is. Thoughts?

  3. I use PVC for outdoor target stands. I guess they cost about the same. I also hang medium duty clamps with nylon twine to hold the targets.
    http : //i1074 . photobucket . com/albums/w419/gwk1951/TEMP/SN853642.jpg
    Remove spaces.

  4. Just what I was looking for! I went with 3/4″ for a little added stability. I’m putting another “T” on top for a short horizontal piece that I’m attaching a 1×2″ to to I can staple several targets in a row on it. Thanks again!

  5. Drive around on bulk garbage day and salvage the old floor lamps. A couple of rare earth magnets and they can be target stands or barricades (with the addition of a piece of cardboard).

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.